Have a set of 39mm Keihins I bought last year and needed 41mm. They are for an fzr 1000 but fit a bunch of other motors from all makes. Had them completely
gone through at Sudco so they are totally fresh and ready to go. The fuel rod kit to change the spacing for other motors is around 50 bucks. I paid $1600 for
my brand new 41mm and will sell the 39mm for $500 shipped or best offer. There just sitting in the box so make me an offer. If you still run stock carbs, you
wont believe the difference when you bolt a set of these on. Quadjammer@aol.com
0 Kudo
39mm Keihins...
| Author | Comment | ||
|---|---|---|---|
 Quadjammer |
39mm Keihins... |
Lead | |
|
Posts: 27 (01/28/08 06:26 PM) |
Last Edited By: Quadjammer 01/28/08 10:51 PM.
Edited 1 time.
|
||
|
jayhawk89 |
|||
|
Posts: 16 (01/31/08 01:55 PM) |
aAre these down or side drafts? Do you know if it will fit a zrx 1200?
Thanks |
||
|
Quadjammer |
|||
|
Posts: 29 (01/31/08 04:29 PM) |
They are down drafts but from what I have seen in a few cars, they work both as side and down depending on the angle you mounted the motor in the car. I do not
have a chart that tells me every motor these fit on but I think there used to be one on the SUDCO website. These carbs are complete with the throttle linkage,
brand new slides, needles and main jets. There was nothing wrong with them but when I sent them to SUDCO, they went through them completely and changed all
that stuff. If you have never heard these carbs, you hear a very distinct sound over stock carbs because they "Clackle" when the car is idling. If
you call Sudco maybe they can tell you if they fit on your motor and if not, how much a new fuel rod / linkage rod cost to make them fit. While you have them
on the phone, ask how much for a new set and you will find out that im selling these for 1/3 the price of a new set. Sudco is here in California.....
|
||
